In the section below, you can find the most frequently asked questions (and answers) we received.

These are categorized in Operation, Reliability, Compliance, and Others.

You can select the FAQs by category or use the search function at the top of the website to directly search for information.
If you cannot find the information you are looking for, use the “DON’T FIND ANSWERS? CONTACT US” button on the top right side of our website.

For a 3 phase PSU, the input port L1 L2 L3 and FG should be connected to AC phase R, S, T and PE respectively. In some cases, neutral might be needed and can be configured as below:

The same configuration can also be used if one want to use multiple single phase power supply for three phase connection.

For specific power supplies i.e., 3 phase power supplies with a lower power, a dual phase operation is possible by directly connecting the 2 phases to two of the three input ports of the power supply.

DC input can also be used by applying the positive wire to any of the input ports, and the negative one to another. In both cases, derating may be needed. (e.g., TDR series)

Categories: Industrial, Operation